Fiber Optical Laser Marking Machine (FOL-20B)
Product Features
Glorystar develops and produces complete air cooling Fiber Optical Laser marking system in China. It is environmental friendly, low consumption, fully automatically and leading laser system. This creative laser system make the optical conversion rate up to 38%-50%, so only air cooling can meet the system requirements, this laser system is Small and compact size, Fiber output, can apply flexibly, and easy to make 3D processing system. Install backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.
Applicable Material
Metals and variety of non-metalic materials, high hardness alloys, oxides , plating ,coating ,ABS, epoxy resin ,ink, plastic,etc.
Technical Data
Model |
FOL-20A/20A/20F |
Power |
20W |
Wavelength |
1064nm |
Beam quality |
M 2 <1.5 |
Output power |
10%~100%(continuously to be adjusted) |
Output frequency |
20KHz~100KHz (continuously to be adjusted) |
(8h)Power stability(8h) |
<±1%rms |
Focus spot diameter |
<0.01mm |
Marking type |
Dynamic mark/static mark |
Carving size |
110mm×110mm |
Carving depth |
≤1.2mm |
Carving speed |
800 standard characters/second |
Minimum line width |
0.012mm |
Minimum character |
0.15mm |
Repeated accuracy |
±0.003mm |
System operation environment |
WindowsXP/2000/98 |
Cooling mode |
Air cooling |
Temperature of operation environment |
15ºC~35ºC |
Power requirement |
220V/single phase/50Hz/<400W |
Life-span of laser module |
100000 Hrs |
Packing size/Gross Weight |
750*350*560mm/60KGS |