Coil Uncoiling and Leveling Feeding System
Our Advantages
1. High-strength welding bed
2. Partitioned smoke extraction system
3. Fully automatic grease injection system
4. Fully automatic cutting, material saving, fast speed
Product Description
GS-F Series has a variety of table sizes such as 3015, 4015, 4020, 6015 to meet different processing needs. The high flexibility and economy are eye-catching, and the best economic benefits can be achieved in thin plate batch cutting. The brand fiber laser is used to give you additional production efficiency advantages in thin plate mass production. At the same time, it is equipped with a variety of high-end configurations to ensure a high level of reliability and performance advantages
Product Parameters
| |
3015 |
4015 |
4020 |
6015 |
Maximum Material Size
(mm) |
3048*1524 |
4064*1524 |
4064*2040 |
6096*1524 |
| X-axis Travel (mm) |
1524 |
1524 |
2024 |
1524 |
| Y-axis Travel (mm) |
3048 |
4064 |
4064 |
6096 |
| Z-axis Travel (mm) |
80 |
| Maximum Acceleration |
2.8G |
| Incision Width (mm) |
0.1-0.5 |
| Dimension |
7500*2300*2380 |
9500*2300*2380 |
9500*2900*2380 |
14500*2300*2380 |
Application
1. Automatically set different lengths according to the graphics required for production, and automatically let the coil equipment feed the corresponding length, as well as the number of repeated processing. There is no need to manually set the feeding length of the coil equipment for a second time.
2. Input the width of the plate to automatically calculate the required graphics, quantity and length, and easily choose whether to cut. No human intervention is required.
3. Fully automatically adjust the leveling parameters. After the laser cutting interface sets the current plate thickness and material, the leveling is automatically calibrated without human intervention. After the operator leaves for a short time, the coil cutting is completed and the equipment is automatically warned and paused.
4. If there is too much manual feeding for the first time, the material can be returned synchronously without damaging the plate
Cutting Samples
>>> Quality Control and R&D
After Sales Service
Installation and debugging
Technicians can be sent to the factory for training (free of service fee for the first time). Customers only need to provide accommodation for engineers.
Training
Free of charge for training within warranty. But customers need to take charge of the cost for accommodation, air tickets, visa fee.
24/7 online service
All our laser equipment is provided with 12 months warranty. Glorystar Laser offers free maintenance or replacement service if something is wrong with the equipment under warranty. If it is out of warranty,Glorystar Laser will send engineers to your factory as soon as possible and only charge the cost of parts.
Accessories supply
IPG laser source is 2 years. Other parts is one year except for optical and consumable parts. Prolong serve is always available for option. Free of charge for fixing and changing parts within warranty. Only changing parts , the freight should be charged by customers.
Remote diagnosis
Glorystar Laser can check the running status of the customer's laser cutter through our remote maintenance system. Our technicians can perform troubleshooting via remote access instead of on-site diagnosis and maintenance, saving you a lot of time.
Additionally, Glorystar Laser will establish a special user profile for all customers who have purchased equipment from us to record your usage, maintenance records and other information. This will help us to learn about customer information more quickly and thus provide necessary upgrades according to customer feedback
Welcome inquiry, our business staff will provide you with warm service, enquiry hotline
Audited Supplier 
){kind=link}